Die Cutter, Foil Stamper and Converting Machinery for Sale
|
Used die cutting, embossing, foil stamping, folder gluer and converting machinery for sale. Platen, cylinder and clamshell die cutters, embossers and foil stampers. Common equipment manufacturers available include Heidelberg cylinder, SBG, SBB, SBD, International, Vega, Rollem, Bobst, Kluge, Brausse, SBL, Iijima, Gietz, Iberica, Sanwa, Kama, Sugano, Yawa, Wupa, Saroglia, Thermo-Type, Johannisberg and Thomson
Equipment Available Below Grouped by Manufacturer then Listed by Descending Age
|
|
2006 Bobst Autoplaten Speria 106E Die Cutter, LIKE NEW with Only 2789 Usage Hours, 740mm x 1060mm Maximum Format, 350mm x 400mm Minimum Format, Up to 4mm Stock, Stripping Section with Assemblies, Racks & Pins, (2) Side Guides, Continuous Feed, Rated 7700 SPH, In Production, CLICK HERE for PHOTOS - Reference 17402
1992 Bobst 130ER-II Die Cutter with Blanking, 36" x 51" Maximum Format, 500 Tons Cutting Pressure, Rated 7000 FPM, Continuous Feed, Non-Stop Delivery, Stripping and Blanking Sections with Assemblies, Control Console, Easy Handling Feeder System, Under Power, 50,000 Usage Hours, CLICK HERE for PHOTOS - Reference 20891
1991 Bobst 102BMA Foil Stamper, Approximately 35,000 Usage Hours, Maximum Sheet 28-3/8" x 40-1/8", Minimum Sheet 13-3/4" x 15-3/4", Maximum Foil Area 26-3/4" x 39-3/4", Minimum Foil Area 13-3/4 x 15-3/4", Rated 7500 SPH Die Cutting and 4500 SPH Foiling, 250 US Tons Cutting Pressure, Automatic Oil Lubrication of Chains, Die Cutting Chase, CLICK HERE for PHOTOS - Reference 27734
1986 Bobst 126BMA, 50" Die Cutter and Foil Stamper, Maximum Sheet Size 36.22" x 49.61", Minimum Sheet Size 13.78" x 19.69", (2) Side Guides, 4-Pull Foil with Rewind, 500 US Tons Cutting Pressure, Maximum Speed 5000 SPH, Honeycomb Chase, Touchscreen Control, In Operation, CLICK HERE for PHOTOS - Reference 27735
1965 Bobst SP1260E Die Cutter, Embosser and Foil Stamper, Maximum Sheet Size 36-1/4" x 49-1/2" (920mm x 1260mm), Minimum Sheet Size 13-3/4" x 19-5/8" (350mm x 500mm), Rated 4500 SPH, 550 Tons Cutting Pressure, Meydag Foiltrax Foiling System, (2) Foil Pulls, (3) Three Zone Heated Platen, Continuous Delivery, (1) Embossing Honeycomb Chase, (1) Cutting Plate, In Operation, CLICK HERE for PHOTOS - Reference 17403
1994 Brausse SBL1050SF Foil Stamper & Embosser, 29" x 41" (750mm x 1050mm) Maximum Format, 370mm x 400mm Minimum Format, Continuous Feeder, Preloader, Dual Side Guides, Heated Platen Area, (12) Heat Zones, Vision 2 Foiling System, Honeycomb Chase, Control Console, Continuous Delivery, 300 Tons Cutting Pressure, Stock Range .004" to .079", Rated 6000 SPH, Recently Upgraded Computer & Software, Shows Well, CLICK HERE for PHOTO - Reference 17401
1988 Gietz Die Cutter & Embosser, 14" x 22" Maximum Format, Non-Stop Feeder, 13" x 18" Stamping Area, Dual-Sided Heated Platen, Request Quote and PHOTOS - Reference 23341
1970 Heidelberg SBD Cylinder Die Cutter, 25-1/4" x 35-3/8" Maximum Format (64cm x 90cm - Reference 17407
1960 Heidelberg S Cylinder, 21-1/4" x 28-3/8" Format (54cm x 72cm) - Reference 17404
1957 Heidelberg S Cylinder, 21-1/4" x 28-3/8" Format (54cm x 72cm) - Reference 17405
1960 Heidelberg KSBA Cylinder, 18" x 22-1/2" Format (46cm x 57cm) - Reference 17406
1961 Heidelberg SB Cylinder Die Cutter, 21-1/4" x 30-1/4" Maximum Format, CLICK HERE for PHOTOS - Reference 39151
1966 Heidelberg KSBA Cylinder Press, 18" x 23" Maximum Format (460mm x 585mm), 140mm x 180mm Minimum Format, In Production, CLICK HERE for PHOTOS - Referernce 30832
Heidelberg 10" x 15" Windmill Die Cutter, Scorer, Perfer, Nice Condition, CLICK HERE for PHOTOS - Reference 56281
• LIKE NEW • 2007 Iijima MJ1040ES Foil Stamper, Die Cutter & Embosser, 28" x 41" Format, Like NEW with 290 Hours, Rated 8000 SPH, Touch Screen Control, HSS-1 High Speed Feeding System, Color Scanner, Double Sheet Detector, Bi-Directional Foil Pulls, Over Tonnage Protection System, 330 Tons Maximum Pressure, Air Blast System 2-6 Draw Foil Cassettes, Direct Drive Servo Motor, Telescopic Foil Roll Change System, 12-Zone Heating System, Honeycomb Chase, Embossing Package with Quick Make-Ready Plates, Die Cutting Chase, Stripping Equipment, Non-Stop Delivery, Preloader, Tape Inserter, Hologram Ready, Make Ready Table w/ Extended Platform, CLICK HERE for PHOTOS - Reference 23271
1986 Iijima BFP1000S Die Cutter, Mabeg Non-Stop Feeder, Continuous Delivery, Dual Side Guides, Stripping Section with Assemblies, In Production, CLICK HERE for PHOTOS - Reference 31021
1975 Iijima BF1000 Die Cutter, 28" x 40" Format, Stripping Section with Assemblies, Continuous Feeder, Continuous Delivery, (2) Side Guides, (1) Chase, (1) Cutting Plate, Manuals, CLICK HERE for PHOTOS - Reference 45381
Johannisberg 104S Cylinder Die Cutter, REBUILT in 2007, 29" x 41" Maximum Format, 12" x 17" Minimum Format, Spiess Feeder, In Operation in USA, CLICK HERE for PHOTOS - Reference 43351
1997 Kluge EHD 14" x 22" Die Cutter, Embosser & Foil Stamper, 3-Draw Foil Pull, Delayed Dwell Unit, Air Brake, Feeder for 15" x 26-1/4" Maximum Sheet Size, (1) Honeycomb Chase, (1) Cutting Plate, Bijur Automatic Lubrication, Safety Enclosure "Box", Remote Controls and Heating Elements, CLICK HERE for PHOTOS - Reference 23031
1989 Kluge EHD 14" x 22" Die Cutter, Embosser and Foil Stamper, Checked & Serviced by M3 and Ready, 3-Draw Foil Pull, Delayed Dwell, 2-Zone Heated Platen, AirBrake, 14" x 22" Maximum Chase Area, (1) Honeycomb Chase, (1) Plate, Auto Lube, Continuous Swing-Away Feeder, Full Safety Guards, CLICK HERE for PHOTO - Reference 52461
1988 Kluge EHE 14" x 22" Die Cutter, Embosser and Foil Stamper, Will be Checked & Serviced, 3-Draw Foil Pull, Delayed Dwell, AirBrake, Full Safety Guards, Honeycomb Chase, Cutting Plate, Full Safety Guards, CLICK HERE for PHOTOS - Reference 29771
1988 Kluge EHD 14" x 22" Die Cutter, Embosser and Foil Stamper, Will be Checked & Serviced, 3-Draw Foil Pull, Delayed Dwell Unit, AirBrake, Honeycomb Chase, Plate, Auto Lube, Related PHOTOS, Request Quote - Reference 27731
1984 Kluge EHE 14" x 22" Die Cutter, Embosser and Foil Stamper, Will be Checked & Serviced, 3-Draw Electronic Foil Pull, Delayed Dwell Unit, AirBrake, Honeycomb Chase, Cutting Plate, Related PHOTOS, Request Quote - Reference 27732
1979 Kluge EHD 14" x 22" Die Cutter, Embosser & Foil Stamper, REBUILT and Ready, Honeycomb Chase, 3-Draw Foil Pull, Manual Brake, Cutting Plate, Automatic Lubrication, CLICK HERE for PHOTOS - Reference 23356
1978 Kluge EHD 14" x 22" Die Cutter, Embosser and Foil Stamper, 3-Draw Foil Pull, Delayed Dwell Unit, Manual Brake, Honeycomb Chase, Cutting Plate, Auto Lube, CLICK HERE for PHOTO - Reference 29772
1974 Kluge EHD 14" x 22" Die Cutter, Embosser and Foil Stamper, 3-Draw Foil Pull, Delayed Dwell Unit, Manual Brake, Honeycomb Chase, Cutting Plate, Auto Lube, CLICK HERE for PHOTO - Reference 29773
1970 Kluge EHD 14" x 22" Die Cutter, Embosser and Foil Stamper, Will be Checked & Serviced, 3-Draw Foil Pull, Delayed Dwell Unit, AirBrake, Honeycomb Chase, Cutting Plate, Related PHOTOS, Request Quote - Reference 27733
Kluge HD 14" x 22" Die Cutter, Embosser and Foil Stamper, 3-Draw Foil Pull, Dwell Unit, (1) Honeycomb Chase, (1) Plate, Lubrication System, CLICK HERE for PHOTOS - Reference 28901
1994 Nikko HotStar HS-80 Embosser, Foil Stamper and Die Cutter, 21-5/8" x 31-1/2" Format, Upgraded with Foil Air Blaster, .004" - .060" Stock, 150 Metric Tons Cutting Pressure, (6) Six Heat Zones on Platen, (3) Three Foil Pulls, (3) Three Rewind Shafts, Honeycomb Chase, Die Cutting Chase, Continuous Feeder, CLICK HERE for PHOTOS - Reference 51661
1992 Vijuk V10 Hi-Die Cutter, 10" x 10" Maximum Format, 1-1/4" x 1-1/4" Minimum Format, 6-3/4" Maximum Pile Height, 1/8" Trim Margin, Rated 22 SPM, CLICK HERE for PHOTOS - Reference 30831
|
|